If you decide to purchase an in-ground basketball hoop, you can have it installed by professionals, or you could do it yourself. Just keep in mind that installation involves careful digging because you must avoid underground utilities. You also have to mix the concrete and set up pole or anchor bolts yourself.
Choose a spot for your new basketball hoop to be placed. Most people place their basketball hoops in their driveways. If you do decide to place it in your driveway, here is a tip: Placing the pole back away from the driveway will reduce the likelihood of the basket hoop getting hit by a car. The only thing is, it reduces the amount of play area.
With placement, you also must think about which direction the basketball hoop will go. The majority of times, you want to keep the backboard straight with the side of your house. If you belong to a Homeowner’s Association, make sure that they allow basketball hoops, and if so, find out the regulations.
Here Are The Basic Steps Involved With Installing An In-Ground Basketball Hoop:
Regulation calls for the height of a basketball hoop to be 10 feet high. However, if you have smaller children, or simply do not want the basketball hoop that high, adjust the pole to your liking. This way, everyone can enjoy your new basketball hoop.
Out With The Old.
If you already have a basketball hoop and you need it removed, there are some companies that will do this for you. It may be a free service if you hire them to install your basketball hoop, but all companies are different. The cost of removal is usually around $50 per hour.
Sometimes it is easier to go the easy route and hire professionals to install your basketball hoop. But, if you want to save some money, you could always install it yourself. Just remember, it may be a daunting job, depending on the basketball hoop you purchase.
Reviewing the best pairs of basketball shoes on the market…up to date for 2018.